Uwell Crown 3 Replacement Coils For Uwell Crown 3 (0.25/0.4/0.5Ohm)
Available Options
Uwell Crown 3 Replacement Coils For Uwell Crown 3 (0.25/0.4/0.5Ohm) Review
Uwell Crown 3 Replacement Coils Instructions
Overview:
The Uwell Crown 3 Replacement Coils are the ideal replacements for the Uwell Crown 3 tank. The parallel structure of the coils creates the best vapor production and incredible flavor. Forget messing around by screwing and unscrewing coils, the Uwell Crown 3 replacement coils have a simple plug-pull installation method! Furthermore, they are made of stainless steel. That means they are compatible with mods using wattage mode plus temperature control mode.
Uwell Crown 3 Coils Specification:
- 0.25ohm resistance
Parallel Coil
SUS316
80W-90W recommended
Made from organic cotton
- 0.4ohm resistance
Quality Kanthal materials
55W-65W recommended
Made from organic cotton
- 0.5ohm resistance
Parallel Coil
SUS316
70W-80W recommended
Made from organic cotton
FAQ for Uwell Crown 3 Replacement Coils Problems
How to prime Uwell Crown 3 Coils?
Take the new coil from the pack. Take the juice bottle. Drip the e-juice onto the mesh (from above) through to the cotton. Drip a few drops at a time and then wait 10 minutes. The wicking holes on the side of the coils should be soaked. Continue to drip the e-juice until they become saturated.
How long do Uwell Crown 3 Coils last?
With moderate usage, the Uwell Crown replacement coils should last two to three weeks.
How to change coil on Uwell Crown 3?
- Gently unscrew the tank by hand
- Remove the top lid, ready for cleaning
- Remove the lower lid. The lower lid houses the coil in the tank. In removing the lower lid, you can take the coil out
- Take the old coil out of the tank
- Put the new coil into the tank. Ensure that the coil is in place securely
What tanks are Uwell Crown 3 Coils compatible with?
The Uwell Crown 3 Tank is the only compatible tank with the Uwell Crown 3 coils.